Termination refers to the practice of properly matching the impedance of a signal source, transmission line, or load to minimize signal reflections and maximize signal integrity. Termination is important to prevent signal degradation, ringing, and other undesirable effects that can occur when there is a mismatch in impedance.
(Here we are discuss the termination of electronic circuits only based on the conductor will discuss later )
There are two common types of termination: series termination and parallel termination.
1. Series Termination
2. Parallel Termination
1. Series Termination:
Series termination is used when the impedance of the transmission line is higher than the characteristic impedance of the source and the load. In this method, a resistor is placed in series with the source or driver at the beginning of the transmission line. The value of the series termination resistor is chosen to match the characteristic impedance of the transmission line. The purpose of the series termination resistor is to dampen the signal and reduce reflections at the source end of the transmission line.
2. Parallel Termination:
Parallel termination is used when the impedance of the transmission line is lower than the characteristic impedance of the source and the load. In this method, a resistor is placed in parallel with the load at the receiving end of the transmission line. The value of the parallel termination resistor is chosen to match the characteristic impedance of the transmission line. The purpose of the parallel termination resistor is to provide a DC path for the signal and minimize reflections at the load end of the transmission line.
Both series and parallel termination techniques aim to minimize signal reflections, but they are applied in different scenarios. Series termination is commonly used when the source impedance is significantly lower than the transmission line impedance, whereas parallel termination is used when the source impedance is higher than the transmission line impedance.
It's important to note that the choice between series and parallel termination depends on various factors, such as signal frequency, trace length, transmission line type, and the electrical properties of the components and circuit elements involved. Proper termination is crucial for high-speed digital signals, analog signals, and other applications where signal integrity is essential.